#
# /usr/local/etc/dovecot/dovecot.conf
# Dovecot configuration file
#
# References
# ----------
# * Dovecot - Quick Configuration
#   http://wiki2.dovecot.org/QuickConfiguration
# * Dovecot - SSL Configuration
#   https://wiki.dovecot.org/SSL/DovecotConfiguration
# * Multiple domains and virtual users (Postfix/Dovecot/SASL)
#   http://void.ideabite.org/2013/07/28/multiple-domains-and-virtual-users/
#
# Aaron LI
#

{% set mydomain = mail.domains[0] %}

# NOTE
# ----
# "doveconf -n" command gives a clean output of the changed settings.
# Use it instead of copy/pasting files when posting to the mailing list.

# Protocols want to be serving.
protocols = imap

# A comma separated list of IPs or hosts where to listen.
#   - "*" listens in all IPv4 interfaces
#   - "::" listens in all IPv6 interfaces
listen = *, ::


##
## 10-auth.conf
## Authentication process, password and user database
##

# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability).
disable_plaintext_auth = yes

# Space separated list of realms for SASL authentication mechanisms
# that need them.  You can leave it empty if you don't want to support
# multiple realms.
#auth_realms =

# Require a valid SSL client certificate or the authentication fails.
#auth_ssl_require_client_cert = no

# Take the username from client's SSL certificate, using 
# X509_NAME_get_text_by_NID() which returns the subject's DN's
# CommonName. 
#auth_ssl_username_from_cert = no

# Space separated list of wanted authentication mechanisms:
#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous
#   gssapi otp skey gss-spnego
# NOTE: See also disable_plaintext_auth setting.
auth_mechanisms = plain login

# The password database used by Dovecot to authenticate users.
#
# See: https://wiki2.dovecot.org/PasswordDatabase
#
# Generate the password with:
#     $ doveadm pw -s SSHA512
#
passdb {
    driver = passwd-file
    args = scheme=SSHA512 username_format=%u /usr/local/etc/dovecot/passwd

    # This is not a database for denied users.
    deny = no
    # This is not a database for master users, which can log in as
    # other users.
    master = no
    pass = no
    skip = never
    result_failure = continue
    result_internalfail = continue
    result_success = return-ok
}

# User database, which will be looked up to obtain user's information
# after the user has been successfully authenticated.  The userdb lookup
# is also done by LDA to find out how to deliver mails for the user.
#
# Dovecot doesn't need to verify the username or the password.
#
# See: https://wiki2.dovecot.org/UserDatabase
#
userdb {
    driver = static
    #
    # Set 'allow_all_users=yes' will make Dovecot ignore the user lookup
    # from the userdb and entirely rely on the passdb lookup.  Therefore,
    # the username may be repeated to have multiple passwords, which can
    # be utilized to achieve device-specific passwords.
    #
    args = allow_all_users=yes
}


##
## 10-logging.conf
## Log destination, verbosity, and debugging.
##

# Log unsuccessful authentication attempts and the reasons why they
# failed.
auth_verbose = yes

# In case of password mismatches, log the attempted password.
# Valid values are no, plain and sha1.
# sha1 can be useful for detecting brute force password attempts vs.
# user simply trying the same password over and over again.
auth_verbose_passwords = sha1

# Space-separated list of elements we want to log.  The elements which
# have a non-empty variable value are joined together to form a
# comma-separated string.
#
# Since we set up device-specific passwords, therefore the full
# username (%u) is the authenticated user after replacing by the auth
# process.  Use %{orig_user}, which expands to the original username
# the client sent before any changes by auth process, to keep track of
# the actual usages.
#
login_log_format_elements = user=<%{orig_user}> method=%m rip=%r lip=%l mpid=%e %c


##
## 10-mail.conf
## Mailbox settings and mail handling.
##

# Home directories for virtual users, where Dovecot can save user-specific
# files.  Home directory shouldn't be the same as mail directory with mbox
# or Maildir formats (but with dbox/obox it's fine).
mail_home = {{ mail.user.home }}/%d/%n

# Location for users' mailboxes. The default is empty, which means that Dovecot
# tries to find the mailboxes automatically. This won't work if the user
# doesn't yet have any mail, so you should explicitly tell Dovecot the full
# location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if there's no domain
#   %h - home directory
#
# See doc/wiki/Variables.txt for full list.
#
mail_location = maildir:{{ mail.user.home }}/%d/%n/mail:LAYOUT=fs

# System user and group used to access mails.  If you use multiple,
# userdb can override these by returning uid or gid fields.  You can
# use either numbers or names.
mail_uid = {{ mail.user.name }}
mail_gid = {{ mail.user.name }}

# Use the dedicated virtual mail user to restrict the temporary
# privileged operations.
mail_privileged_group = {{ mail.user.name }}

# Only allow Dovecot use the dedicated virtual mail user.
first_valid_uid = {{ mail.user.id }}
last_valid_uid  = {{ mail.user.id }}
first_valid_gid = {{ mail.user.id }}
last_valid_gid  = {{ mail.user.id }}

# Mailbox list indexes can be used to optimize IMAP STATUS commands.
# They are also required for IMAP NOTIFY extension to be enabled.
mailbox_list_index = yes

# Assume Dovecot is the only MUA accessing Maildir:
# Scan cur/ directory only when its mtime changes unexpectedly or when
# we can't find the mail otherwise.
maildir_very_dirty_syncs = no

# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames
# for getting the mail's physical size, except when recalculating
# Maildir++ quota.  This can be useful in systems where a lot of the
# Maildir filenames have a broken size.  The performance hit for
# enabling this is very small.
#maildir_broken_filename_sizes = no

# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
#
namespace inbox {
  # There can be only one INBOX, and this setting defines which namespace
  # has it.
  inbox = yes

  # 15-mailboxes.conf
  # Mailbox definitions
  #
  # Each mailbox is specified in a separate mailbox section.  The
  # section name specifies the mailbox name.  If it has spaces, you can
  # put the name "in quotes".  These sections can contain the following
  # mailbox settings:
  #
  # auto:
  #   Indicates whether the mailbox with this name is automatically
  #   created implicitly when it is first accessed.  The user can also
  #   be automatically subscribed to the mailbox after creation.  The
  #   following values are defined for this setting:
  # 
  #     no        - Never created automatically.
  #     create    - Automatically created, but no automatic subscription.
  #     subscribe - Automatically created and subscribed.
  #  
  # special_use:
  #   A space-separated list of SPECIAL-USE flags (RFC 6154) to use for
  #   the mailbox.  There are no validity checks, so you could specify
  #   anything you want in here, but it's not a good idea to use flags
  #   other than the standard ones specified in the RFC:
  #
  #     \All      - This (virtual) mailbox presents all messages in the
  #                 user's message store. 
  #     \Archive  - This mailbox is used to archive messages.
  #     \Drafts   - This mailbox is used to hold draft messages.
  #     \Flagged  - This (virtual) mailbox presents all messages in the
  #                 user's message store marked with the IMAP \Flagged
  #                 flag.
  #     \Junk     - This mailbox is where messages deemed to be junk
  #                 mail are held.
  #     \Sent     - This mailbox is used to hold copies of messages that
  #                 have been sent.
  #     \Trash    - This mailbox is used to hold messages that have been
  #                 deleted.
  #
  # comment:
  #   Defines a default comment or note associated with the mailbox.
  #   This value is accessible through the IMAP METADATA mailbox entries
  #   "/shared/comment" and "/private/comment". Users with sufficient
  #   privileges can override the default value for entries with a custom
  #   value.
  #
  mailbox Drafts {
    special_use = \Drafts
    # Automatically created and subscribed.
    auto = subscribe
  }
  mailbox Junk {
    special_use = \Junk
    auto = subscribe
  }
  mailbox Trash {
    special_use = \Trash
    auto = subscribe
  }
  mailbox Sent {
    special_use = \Sent
    auto = subscribe
  }

  mailbox Archive {
    special_use = \Archive
    auto = subscribe
  }

  # If you have a virtual "All messages" mailbox:
  #mailbox virtual/All {
  #  special_use = \All
  #  comment = All my messages
  #}

  # If you have a virtual "Flagged" mailbox:
  #mailbox virtual/Flagged {
  #  special_use = \Flagged
  #  comment = All my flagged messages
  #}
}


##
## 10-master.conf
##

service imap-login {
  inet_listener imap {
    # Disable non-SSL IMAP!
    port = 0
  }

  inet_listener imaps {
    #port = 993
    #ssl = yes
  }
}

service auth {
  # This userdb socket is typically used by dovecot-lda, doveadm,
  # possibly imap process, etc.  Users that have full permissions to
  # this socket are able to get a list of all usernames and get the
  # results of everyone's userdb lookups.
  #
  # The default 0666 mode allows anyone to connect to the socket, but
  # the userdb lookups will succeed only if the userdb returns an "uid"
  # field that matches the caller process's UID.  Also if caller's uid
  # or gid matches the socket's uid or gid the lookup succeeds.
  # Anything else causes a failure.
  unix_listener auth-userdb {
    mode = 0600
    user = {{ mail.user.name }}
    group = {{ mail.user.name }}
  }

  # Postfix smtp-auth
  unix_listener /var/spool/postfix/private/auth {
    mode = 0660
    user = postfix
    group = postfix
  }
}


##
## 10-ssl.conf
##

# SSL/TLS support: yes, no, required.
# NOTE: If only plaintext auth mechanisms enabled (e.g., "plain",
# "login"), "ssl=yes" and "ssl=required" is equivalent.
ssl = required

# PEM encoded X.509 SSL/TLS certificate and private key.
# They're opened before dropping root privileges, so preferred
# permissions is: root:root, 0400.
ssl_cert = </usr/local/etc/ssl/acme/{{ mydomain }}/fullchain.pem
ssl_key = </usr/local/etc/ssl/acme/private/{{ mydomain }}.pem

# DH parameters file.
#ssl_dh = </usr/local/etc/ssl/dhparam4096.pem

# DH parameters length to use. (version == 2.2)
#
# NOTE: to re-generate DH-parameters, first manually delete current
#       parameters: "/var/db/dovecot/ssl-parameters.dat", and then
#       restart Dovecot.
#
ssl_dh_parameters_length = 2048

# PEM encoded trusted certificate authority.
# Set this only if you intend to use "ssl_verify_client_cert=yes".
# The file should contain the CA certificate(s) followed by the
# matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
#ssl_ca = 

# Request client to send a certificate.  If you also want to require
# it, set "auth_ssl_require_client_cert=yes" in auth section.
#ssl_verify_client_cert = no

# Which field from certificate to use for username.  commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# "auth_ssl_username_from_cert=yes".
#ssl_cert_username_field = commonName

# SSL protocols to use: disable SSL, use TLS only!
ssl_protocols = !SSLv3 !SSLv2

# SSL ciphers to use
ssl_cipher_list = EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA256:EECDH:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!IDEA:!ECDSA:kEDH:CAMELLIA128-SHA:AES12

# Prefer the server's order of ciphers over client's.
ssl_prefer_server_ciphers = yes


##
## 15-lda.conf
## LDA specific settings (also used by LMTP)
##

protocol lda {
  # Space separated list of plugins to load
  # (default is global mail_plugins).
  mail_plugins = $mail_plugins sieve
}


##
## 20-imap.conf
## IMAP specific settings
##

# How long to wait between "OK Still here" notifications when client is
# IDLEing.
imap_idle_notify_interval = 4 mins

# Workarounds for various client bugs:
#   delay-newmail:
#     Send EXISTS/RECENT new mail notifications only when replying to NOOP
#     and CHECK commands. Some clients ignore them otherwise, for example OSX
#     Mail (<v2.1). Outlook Express breaks more badly though, without this it
#     may show user "Message no longer in server" errors. Note that OE6 still
#     breaks even with this workaround if synchronization is set to
#     "Headers Only".
#   tb-extra-mailbox-sep:
#     Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
#     adds extra '/' suffixes to mailbox names. This option causes Dovecot to
#     ignore the extra '/' instead of treating it as invalid mailbox name.
#   tb-lsub-flags:
#     Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
#     This makes Thunderbird realize they aren't selectable and show them
#     greyed out, instead of only later giving "not selectable" popup error.
#
# The list is space-separated.
imap_client_workarounds = delay-newmail tb-extra-mailbox-sep

protocol imap {
  # Space separated list of plugins to load (default is global mail_plugins).
  #mail_plugins = $mail_plugins

  # Maximum number of IMAP connections allowed for a user from each IP address.
  # NOTE: The username is compared case-sensitively.
  #mail_max_userip_connections = 10
}


##
## 90-plugin.conf
## Plugin settings
##

# NOTE:
# All wanted plugins must be listed in mail_plugins setting before any
# of the settings take effect.

plugin {
  #setting_name = value

  #
  # Sieve: from package 'dovecot-pigeonhole'
  # See: https://wiki.dovecot.org/Pigeonhole/Sieve/Configuration
  #

  # The location of the user's main script storage.  The active script
  # in this storage is used as the main user script executed during
  # delivery.  The "include" extension fetches the ":personal" scripts
  # from this location.  When "ManageSieve" is used, this is also where
  # scripts are uploaded.
  # Here we use the file system as storage, with all the user's scripts
  # located in the directory "~/sieve" and the active script (symbolic
  # link) located at "~/.dovecot.sieve".
  sieve = file:~/sieve;active=~/.dovecot.sieve

  # Multiple global scripts that will been executed sequentially
  # before/after the user's private script.
  #
  # If the "file" location path points to a directory, all the Sieve
  # scripts contained therein (with the proper ".sieve" extension) are
  # executed.
  #
  # Gobal scripts executed before the user's personal script.
  sieve_before = /usr/local/etc/dovecot/sieve/before.d
  #
  # User-specific scripts executed before the user's personal script.
  # (e.g., a vacation script managed through a non-ManageSieve tool.)
  sieve_before2 = ~/sieve-before.d
  #
  # User-specific scripts executed after the user's personal script.
  # NOTE: only when "keep" is still in effect.
  sieve_after = ~/sieve-after.d
  #
  # Gobal scripts executed after the user's personal script.
  # NOTE: only when "keep" is still in effect.
  sieve_after2 = /usr/local/etc/dovecot/sieve/after.d
}