aboutsummaryrefslogtreecommitdiffstats
path: root/roles/netinstall/templates
diff options
context:
space:
mode:
Diffstat (limited to 'roles/netinstall/templates')
-rw-r--r--roles/netinstall/templates/debian.preseed.cfg.j2447
1 files changed, 447 insertions, 0 deletions
diff --git a/roles/netinstall/templates/debian.preseed.cfg.j2 b/roles/netinstall/templates/debian.preseed.cfg.j2
new file mode 100644
index 0000000..c01f4e9
--- /dev/null
+++ b/roles/netinstall/templates/debian.preseed.cfg.j2
@@ -0,0 +1,447 @@
+#_preseed_V1
+
+##
+## Contents of the preconfiguration file (for stretch/testing)
+##
+## Example: https://d-i.debian.org/manual/example-preseed.txt
+## Guide: https://d-i.debian.org/manual/en.amd64/apb.html
+##
+## 2017-06-14
+##
+
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debian-installer/locale string en_US
+
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/language string en
+#d-i debian-installer/country string NL
+#d-i debian-installer/locale string en_GB.UTF-8
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
+
+# Keyboard selection.
+d-i keyboard-configuration/xkb-keymap select us
+# d-i keyboard-configuration/toggle select No toggling
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+#d-i netcfg/link_wait_timeout string 10
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+#d-i netcfg/dhcpv6_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_autoconfig boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#
+# IPv4 example
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+#
+# IPv6 example
+#d-i netcfg/get_ipaddress string fc00::2
+#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
+#d-i netcfg/get_gateway string fc00::1
+#d-i netcfg/get_nameservers string fc00::1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# If you want to force a hostname, regardless of what either the DHCP
+# server returns or what the reverse DNS entry for the IP is, uncomment
+# and adjust the following line.
+#d-i netcfg/hostname string somehost
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+d-i hw-detect/load_firmware boolean false
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string {{ apt_mirror }}
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password {{ node_root_pass }}
+d-i passwd/root-password-again password {{ node_root_pass }}
+# or encrypted using a crypt(3) hash.
+#d-i passwd/root-password-crypted password [crypt(3) hash]
+
+# To create a normal user account.
+d-i passwd/user-fullname string {{ node_user_fullname }}
+d-i passwd/username string {{ node_user_name }}
+# Normal user's password, either in clear text
+d-i passwd/user-password password {{ node_user_pass }}
+d-i passwd/user-password-again password {{ node_user_pass }}
+# or encrypted using a crypt(3) hash.
+#d-i passwd/user-password-crypted password [crypt(3) hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string Asia/Shanghai
+
+# Controls whether to use NTP to set the clock during the install
+#d-i clock-setup/ntp boolean true
+d-i clock-setup/ntp boolean false
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/sda
+# and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm: use LVM to partition the disk
+# - crypto: use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home: separate /home partition
+# - multi: separate /home, /var, and /tmp partitions
+#d-i partman-auto/choose_recipe select atomic
+d-i partman-auto/choose_recipe select home
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string \
+# boot-root :: \
+# 40 50 100 ext3 \
+# $primary{ } $bootable{ } \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ /boot } \
+# . \
+# 500 10000 1000000000 ext3 \
+# method{ format } format{ } \
+# use_filesystem{ } filesystem{ ext3 } \
+# mountpoint{ / } \
+# . \
+# 64 512 300% linux-swap \
+# method{ swap } format{ } \
+# .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+# When disk encryption is enabled, skip wiping the partitions beforehand.
+#d-i partman-auto-crypto/erase_disks boolean false
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used.
+#d-i partman-auto/expert_recipe string \
+# multiraid :: \
+# 1000 5000 4000 raid \
+# $primary{ } method{ raid } \
+# . \
+# 64 512 300% raid \
+# method{ raid } \
+# . \
+# 500 10000 1000000000 raid \
+# method{ raid } \
+# .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+# <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+# 1 2 0 ext3 / \
+# /dev/sda1#/dev/sdb1 \
+# . \
+# 1 2 0 swap - \
+# /dev/sda5#/dev/sdb5 \
+# . \
+# 0 2 0 ext3 /home \
+# /dev/sda6#/dev/sdb6 \
+# .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-686
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+d-i apt-setup/non-free boolean true
+d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+d-i apt-setup/services-select multiselect security, updates
+#d-i apt-setup/security_host string security.debian.org
+d-i apt-setup/security_host string {{ apt_security_host }}
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+# http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+# Uncomment this to add multiarch configuration for i386
+#d-i apt-setup/multiarch string i386
+
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server, kde-desktop
+tasksel tasksel/first multiselect standard, ssh-server
+
+# Individual additional packages to install
+d-i pkgsel/include string openssh-server build-essential python
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+### Boot loader installation
+# Grub is the default boot loader (for x86). If you want lilo installed
+# instead, uncomment this:
+#d-i grub-installer/skip boolean true
+# To also skip installing lilo, and install no bootloader, uncomment this
+# too:
+#d-i lilo-installer/skip boolean true
+
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the MBR if it also finds some other
+# OS, which is less safe as it might not be able to boot that other OS.
+d-i grub-installer/with_other_os boolean true
+
+# Due notably to potential USB sticks, the location of the MBR can not be
+# determined safely in general, so this needs to be specified:
+d-i grub-installer/bootdev string /dev/sda
+# To install to the first device (assuming it is not a USB stick):
+#d-i grub-installer/bootdev string default
+
+# Alternatively, if you want to install to a location other than the mbr,
+# uncomment and edit these lines:
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+#d-i grub-installer/bootdev string (hd0,1)
+# To install grub to multiple disks:
+#d-i grub-installer/bootdev string (hd0,1) (hd1,1) (hd2,1)
+
+# Optional password for grub, either in clear text
+#d-i grub-installer/password password r00tme
+#d-i grub-installer/password-again password r00tme
+# or encrypted using an MD5 hash, see grub-md5-crypt(8).
+#d-i grub-installer/password-crypted password [MD5 hash]
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+#d-i debian-installer/add-kernel-opts string nousb
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+# debconf-get-selections --installer > file
+# debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+# string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+d-i preseed/late_command string \
+ in-target wget -O /tmp/post-install.sh http://{{ lan_ip }}/nodes/post-install.sh ; \
+ in-target /bin/sh /tmp/post-install.sh http://{{ lan_ip }}/nodes